how to install weed barrier fabric
Here are the basic steps to install weed barrier fabric in a landscape bed:
1.Prepare the soil. Remove weeds and debris. Rake the soil surface smooth.
2.Measure and cut the fabric. Measure the bed and add 6-12 inches on all sides. Cut to size with scissors.
3.Position the fabric. Lay it out flat in the bed, smoothing any wrinkles. Overlap seams 4-6 inches and secure.
4.Secure the edges. Fold the edge of the fabric 6 inches over and tightly towards the inside of the bed.
5.Bury the edges. Dig a 2-3 inch trench along the edges inside the bed. Bend the folded edge into the trench and backfill firmly.
6.Lay plants or mulch. Cut holes in the fabric for plants and position according to your plan.
7.Top with mulch. Apply 2-4 inches of organic mulch over the fabric, keeping it 6 inches away from tree trunks.
8.Staple fabric edges. For high wind areas, staple the fabric edge every 6-12 inches along the trench.
9.Water thoroughly. This settles the soil and fabric. Maintain moist soil as plants establish.
10.Monitor and replace mulch. Check for weeds and refill mulch as needed over time. Replace fabric in 3-5 years.
Proper installation is key to allowing the fabric to work effectively as a weed barrier over time.
